Tools/Maintenance

SRAM's Butter Grease is a Slickoleum lube recommended for fork bushings, Roam and Rise wheel rear hub pawls and Reverb seat post service. Keep your parts working smoothly!

- For installing DUB BSA bottom brackets - Compatible with a 3/8-inch drive torque wrench so you can torque to spec

- Cleaning oil and all weather oils for Rohloff speedhubs

Periodic hydraulic remote bleeds are necessary to maintain consistent performance. RockShox's Bleed Kit has everything you need to keep your Reverb and X-Loc remotes functioning at their best.

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only

Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously

ProGold ProLink is designed to shed dirt, mud, and abrasives, and reduce tacky build-up in all climates. - Smoother shifting, quieter drive train - Repels moisture and reduces oxidation and corrosion - Disperses water and resists wash-off - Will not build up or get tacky - Works well in all climates - Longer chain and sprocket life - Long-lasting - Can be used as a dry lubricant - Environmentally friendly - Available in: 4 fluid-ounce drip, 8 fluid-ounce aerosol, 16 fluid-ounce pump, and 32 fluid-ounce.

- Accurate inexpensive gauge measures wear/elongation of most chains

Our Tenacious Oil is used for ultimate protection and durability for components that have movement with metal-to-metal contact. Our base oil has been produced for us by the same independent California refinery since 1971. The final blending of rust inhibitors and extreme wear additives happens at our facility before the product is bottled and shipped. - Ultimate protection and durability for metal-metal contact - Base oil with rust inhibitors and anti-wear additives

- Prevents rust, repels water - Extra heavy duty, nothing finer - Has achieved the Premium lubricant classification by all major bearing manufacturers worldwide

- Makes your bike shine like new and keeps it that way. - Biodegradable formula cleans, polishes, and protects in one step. - Also great for dropper posts, suspension, and for seating tire beads. The original bike polish, Bike Lust's proprietary silicone-based formula includes a biodegradable cleaning agent. Bike lust goes on wet, quickly cleaning light dirt and grime as it polishes, and then dries to a beautiful protective coating. Works on any surface or material in one simple step making your bike look like new and future cleaning easier! Also great for dropper posts, suspension, and for seating tire beads. Bike Lust can be used on all types of materials and finishes including carbon fiber and matte finishes. It's also fantastic on tires to help shed mud and dirt as you ride.

- Fits Shimano, Sun Race, Sachs, and other 12 spline, 22.7mm diameter 5–10 speed freewheels and all Campagnolo cassette lockrings and Record, Chorus, Centaur, and Athena bottom brackets. - Professional quality and precision sized for the perfect fit. - Designed to work with Pedro's snap-channel Pro Socket Handle, a 24mm socket or wrench, or in a bench vise. Pedro's socket tools provide a professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly, protecting the component and ensuring simple and safe usage for the mechanic.

The hex wrench is the most common tool needed for the modern bicycle. Choosing the right set can make the difference between good day and a bad day working on bikes. Pedro's L Hex Wrench Set is up to the challenge. They made these wrenches from heat-treated SNCM-V alloy steel to ensure superior strength and long-lasting performance. Pedro's hex wrenches also feature extra length and a round-style end for better leverage and easy access and handling of hard-to-reach bolts. The set includes all the sizes you need in a convenient holder. - Made from heat-treated SNCM-V alloy steel to ensure long-lasting performance - Extra length provides great leverage and access to hard-to-reach bolts - Includes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10mm sizes in convenient holder

Replacement pins for Pedro's Pro Chain Tool, Pro Chain Tool 2.0, and Apprentice Chain Tool - Includes two replacement pins

Replacement Pins for Tutto Multi-Chain Tool. - For Pedro's Tutto Multi-Chain Tool - Includes two replacement pins

Y-Style Hex Wrench - Perfect for common hex hardware found on modern bicycles and components. - New improved ergonomic Y-style handle design. - Features refined body shape, quick-spin bit sleeves, longer bits, and bit-size indication. - Designed to stand up to the harsh conditions of professional use. - Pedro's popular Y-Wrenches feature heat-treated tool steel construction and durable plastic body designed to stand up to the harsh conditions of professional use. - The new improved ergonomic design features a refined body shape for improved fit and comfort, new quick-spin bit sleeves for speed and versatility, and bit-size indication for quick tool identification. - Backed by Pedro's lifetime warranty.

The Torx-style fastener is becoming the new standard for modern bicycles and components. Pedro's led the way offering the first Y-style Torx wrench to meet the demand. Recently named VeloNews Editor's Pick for Best 3-Way Wrench, Pedro's popular Y-Wrenches feature heat-treated tool steel construction and a durable plastic body designed to stand up to the harsh conditions of professional use. The new, improved ergonomic design features a refined body shape for improved fit and comfort, new quick-spin bit sleeves for speed and versatility, and bit-size indication for quick tool identification. Includes T10,T25, and T30 sizes, perfect for the most common Torx hardware sizes found on modern bicycles and components. - New improved ergonomic y-style handle design - Features refined body shape, quick-spin bit sleeves, longer bits, and bit-size indication - Designed to stand up to the harsh conditions of professional use - Backed by Pedro's lifetime warranty.

Refill pack for the Park Tool TPT-1 Tubeless Plug Tire Tool and other similar tools. These vulcanized rubber plugs are used to temporarily repair punctures in tubeless bicycle tire systems. Set of 5. NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.

Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-3 FEATURES - 2mm, 2.5mm, and 3mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

Park's Bottom Bracket Wrench has 2 ends to fit slotted bottom bracket adjusting cups and cups with raised 16mm wrench flats common on older English and less-expensive bicycles. Please ask if you have any questions whether this wrench is right for your repair.

Precision CNC machined aluminum tool for the installation and removal of 16-notch external bearing bottom brackets. Featuring updated tooth profiles to optimize the fit between the tool and high performance BB parts. Anodized and laser engraved for easy identification and featuring a ratchet/torque wrench compatible 3/8-inch drive. - 16-notch 39mm OD cups - Fits: Shimano XTR BB93, Dura-Ace BB9000, Token - Added depth to fit Shimano STEPS square drive motor

A clean bike is a happy bike! Park Tool's Bike Cleaning Brush Kit is a four-piece brush set designed specifically to clean bicycles. Ergonomically designed and featuring dual-density, sure-grip handles, the BCB-4.2 kit includes: • 1 GSC-1 Gear Clean Brush • 1 Tapered Detail Brush • 1 Frame Cleaning Sponge/Bristle Brush • 1 Soft Bristle Soaping Brush

Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle

The BBT-29 is a double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 39mm (e.g. Shimano Dura-Ace 9000 series and XTR 980 series) as well as 16-notch bearing cups with an outside diameter of 48.5mm (e.g. FSA MegaEvo).

Park's Bottom Bracket/Cassette Tool for Campagnolo is an indispensable tool for your Campagnolo drivetrain. It's for installing and removing all Record, Chorus, Centaur and Athena bottom brackets, and all Campagnolo cassette lockrings.

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool

The FR-5GT specifically allows you to remove and install cassette lockrings from thru axle hubs. - Utilizes a 12mm guide pin to stabilize the tool in use - Fits 12-spline cassette lockrings from Shimano , SRAM, SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings

A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.

Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.

Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.

Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)

Now you can easily tackle any crank bolt with Park's Crank Wrench. It features a dual-sided head with a 14mm socket and 8mm Allen wrench on a long, vinyl-coated handle so you're sure to have the leverage necessary for the job.

The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.

Park's Cyclone Chain Scrubber is made of durable materials throughout and features an extra-large solvent reservoir, a series of rotating brushes, and a two-step cleaning process to get chains really clean without removal. There's even a strong magnet that draws metal particles scrubbed from the links to the bottom of the reservoir, preventing redistribution. And, the Cyclone's large handle makes it easy to hold and fill.

Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

A professional level tool set designed and built for portability. The EK-3 is perfect for team and event mechanics or the home mechanic who wants the ultimate portable tool kit. Neatly organized in Park Tool's world-famous BX-2.2 Blue Box Tool Case, this tool kit features 56 of their best tools to do hundreds of repair and maintenance tasks. Plus, the bomb-proof Blue Box features pockets, pouches, straps and open space to add more tools and parts! Kit Includes: - ATD-1.2 Adjustable Torque Driver - AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm - BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups - BBT-32 Bottom Bracket Tool for 20 Notch Shimano and ISIS Drive - BO-2 Bottle Opener - CC-4 Chain Checker - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CP-1.2 Cassette Pliers - CT-3.3 Chain Tool - CWP-7 Compact Universal Crank Puller - DCW-1 Double-Ended Cone Wrench: 13/14mm (2) - DCW-2 Double-Ended Cone Wrench: 15/16mm (2) - DCW-3 Double-Ended Cone Wrench: 17/18mm - DSD-2 Derailleur Screwdriver: Cross Tip - DSD-4 Derailleur Screwdriver: Flat Blade - DT-2 Rotor Truing Fork - FR-5.2H Cassette Lockring Tool with Handle - GSC-1 GearClean Brush - HCW-15 36mm/32mm Headset Wrench - HMR-8 Shop Hammer - HT-8 8mm Hex Tool - HXS-1.2 Hex Wrench Set - LP-7 Utility Pliers - MLP-1.2 Master Link Pliers - MW-8 Metric Wrench: 8mm - MW-9 Metric Wrench: 9mm - MW-10 Metric Wrench: 10mm - PAW-12 12" Adjustable Wrench - PW-4 Professional Pedal Wrench - RR-12 Tape Measure - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - SZR-1 Shop Scissors - TL-6.2 Steel Core Tire Levers - TWS-1 Torx Compatible Wrench Set

The Park FR-6 Freewheel Remover fits most 4-notch BMX and singlespeed freewheels. It can be held with a wrench or vise and its narrow profile allows use without removal of cones and locknuts.

The Park Tool Fold-Up Hex Wrench Set combines 4, 5 and 6mm hexes, a flat blade screwdriver and a T25 Torx compatible driver into one convenient fold-up tool. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.

The Park Tool FWS-2 Fold-Up Wrench Set combines all the popular hex and Torx compatible wrench sizes of the AWS-10 and TWS-2 into one convenient set. The multi-position shop grade fold-ups are comfortable, lightweight, slip-resistant, and 40% stronger than steel handles. Made in USA.

Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.

Park's Hex Wrench Set offers 3, 4, 5, 6, 8, and 10mm Allen wrenches with chamfered tips for a great grip and easy use. The one-piece fiber-reinforced-resin handle is light, comfortable, slip-resistant, and 40% stronger than traditional steel handles.

12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.

Park's Crank and Bottom Bracket Wrench is perfect for working on old-style bottom brackets. The HCW-5 is a dual-sided lockring hook spanner, featuring a three-prong side and a single hook side for different style lockrings.

The RT-1 Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup. • Fits 1”, 1-1/8” and 1-1/4” headsets • Strong, heat treated alloy steel with nickel finish The RT-1 will also remove the PressFit 30 (PF30) bottom bracket units. The PressFit 30 inside diameter is the same as headset cups, and are pressed in the same manner. SHIS terminology: Removes cups of EC29, EC30, EC34, EC44, ZS41, and ZS44

Get those heads sealing like new and reduce compressor energy waste with Park Tool's Head Seal Kit. This kit will help get rid of that hissing sound you've been hearing when it has been too long since servicing your Park Tool INF-1 or INF-2 shop inflator. Kit includes: - 1 #1586 Presta Seal - 1 #1588 Schrader Seal - 2 #1576-2 O-rings for Shuttle-valve - 1 #1682-2 O-ring for INF-1 and INF-2 Head Adaptors

Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.

Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!

Park's Multi Tool is made of investment-cast tool steel, nickel plated for durability. It includes 3, 4, 5, 6 and 8mm Allen wrenches; 8, 9, and 10mm box wrenches; and a regular screwdriver. The tools are positioned for easy use, too.

Park's Needle Nose Pliers are professional quality, 6-inches long, and made from forged, heat-treated chromoly steel. For ease of use they have a hidden spring, cutting jaws and 5 different gripping and crimping areas. Plus, they have soft-touch, dual-density handles for an excellent grip.

Park's Open Ended Metric Wrench is a special thin wrench with 8 and 10mm openings perfect for adjusting the thin pivot-bolt nuts on sidepull brakes (and other hex nuts on your bicycle). This handy brake tool is made of durable tool steel that's nickel plated for corrosion resistance.

Park's Open Ended Metric Wrench is a thin wrench with 9 and 11mm openings so it's perfect for working on the pivot-bolt nuts on sidepull brakes (and derailleurs with hex nuts). This useful tool is nickel plated for durability.

Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.

A must-have tool for any rider or mechanic who services hydraulic brakes. The PS-1 Pad Spreader features a tapered edge designed to drive apart and reset hydraulic bicycle brake pads that may have been accidentally engaged. The head of the PS-1 mimics a section of disc brake rotor, with strong stainless steel construction and a long, vinyl-dipped handle for leverage and comfort. The PS-1 can also be used as a temporary stand-in for the rotor when testing or servicing the hydraulic system, negating the need to repeatedly remove and install the wheel. - Thickness: 1.95 mm - Length: 162 mm (6.4")

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs